The plan of Testing Laboratory in feed factory
General Feed enterprises for the establishment of small and medium-sized laboratory, mainly engaged in raw materials and products analysis. In the design of the plant, the size of the laboratory should be arranged reasonably according to the need. Under normal circumstances, the laboratory should be built far away from the production boiler room to prevent the harmful gas and industrial dust from harming the laboratory, eliminate the influence of production vibration on analysis and inspection.
Laboratory rooms should be set according to the specific circumstances, large feed enterprises laboratory rooms can be more, small and medium enterprises can be less, but should be based on the nature of the work, the use of equipment, mutual influence, the placement of instruments and equipment in various categories for ease of management. A larger laboratory may have a physical examination room (for physical examination) , a laboratory (for routine chemical examination of the sample processor) , a balance room (for weighing the sample) , and a precision instrument room (for more sophisticated instruments) . Such as colorimeter, acidity meter, fluorescence photometer, etc.) , electric heating room (place muffle furnace, oven, electric heating plate, constant temperature and humidity box, etc.) sample storage room; Small and medium-sized enterprises laboratory can not be subdivided by Gross leasable area, but less to set up laboratory, Instrument Laboratory laboratory can be set up in the middle of the test bench, the test bench installed reagent shelf to place common reagents. Set up laboratory water pipe, Faucet and sewer pipe to measure crude protein, crude fat, etc. . At least water basins shall be installed on both sides of the test joint to facilitate washing. Receptacles can be mounted on the stand of the reagent holder to provide a close power source for distillation.
The middle of the laboratory can be set up test-bed, the test-bed is equipped with reagent rack to place common reagents. Set up laboratory water pipe, Faucet and sewer pipe to measure crude protein, crude fat, etc. . At least water basins should be installed on both sides of the test joint to facilitate washing. Receptacles can be mounted on the stand of the reagent holder to provide a close power source for distillation.